Click here for better printing ECOBASE Waterproofing Membrane
Spraying EcobaseStretches up to 1200%

Engineered To Outperform All Other Waterproofing Membranes

An extremely flexible waterproofing membrane to handle movement and minor cracking.
A highly polymerized water-based emulsion to provide years of protection without breakdown.
Exceptional bonding even on damp substrate and green concrete.
Completely seamless thus preventing traditional seam failure of sheet goods.
Excellent durability to provide resistance to backfill damage.
Coverages

Walls - good water protection (40 mil) .........
Walls - better water protection (55-60 mil) ...

Typical Uncured Properties
Specific Gravity (ASTM D 244) .....................
Viscosity (ASTM D 1200) ..............................
PH ......................................................................
Flammability (ASTM D 3143) ........................
Color ..................................................................
Non-Toxic .........................................................
Shelf Life ...........................................................







30 sq. ft./gal.
22 sq. ft./gal.


1.000
>25 centipoise
12.3
500°F
Brown to black
No Solvents
6 months





Typical Cured Properties

Initial Cure ....................................................
Final Cure .....................................................
Tensile strength ..........................................
Elongation (ASTM D412) ..........................
Resilience .....................................................
Moisture Vapor Transmission ...................
Impermeability to Water (ASTM 96-72) ...
Bonding (ASTM C 836-76) .........................
Resistance to Acids
Hydrochloric ...................................
Acetic ...............................................
Sulfuric .............................................
Temperature Effect
Stable ................................................
Flexible ..............................................


10 minutes
24 - 48 hours
20 psi
1200%
90% (recovery)
.01 gm/sq.ft./hr
32 psi
pull off force 34.1 psi

13%
30%
13%

248°F
13°F
1. PRODUCT NAME

ECOBASE

2. MANUFACTURER

Epro Services, INC.
P.O. Box 347
Derby, KS 67037
Phone: 800 - 882 - 1896
Fax: 316 - 262 - 2529

3. PRODUCT DESCRIPTION

Basic Use:
ECOBASE is designed to be a basic waterproofing and vapor retardant barrier for vertical application to both below grade and above grade surfaces ECOBASE is to be applied with tho unique self contained ECO Sprayer to produce instantaneous, monolithic coating at accelerated rates It may be used as a base coat for other water-based products

Composition:
ECOBASE is a water-based, high solids, highly polymer-modified asphalt emulsion, which exhibits elastomeric qualities to handle minimal expansion and contraction movement and increase its durability

Benefits:
- VOC compliant.
- Non hazardous, non-toxic, and non-flammable.
- Efficient and effective application.
- Cost effective.
- Non-leaching.
- Excellent water proofing.

Limitations:
- Should be applied to clean and dry surfaces.
- Adjacent areas and surfaces should be protected from contact with the product.
- Exposure to UV.
- Should be stored above 40°F.
- A test area should always be done to verify compatibility of substrate with product
- Solvent-based products should not be applied over this product.

4. TECHNICAL DATA

Properties: See Chart

Coverage's See Chart

Specification Writer:
Contact EPRO services before writting specifications on this project. Test information available upon request.

5. INSTALLATION

Preparation:
Must include but not limited to:
- All surfaces should bo dry and free of loose materials and other contaminants. These should be removed priorto application by power washing or other suitable methods.
- Repairs: Any cracks, spall or metal protrusion areas should be repaired by brush or trowel application of ECOLINE-T insuring penetration of materials in damaged or cracked area. Large cracks may also require a layer of fiberglass mesh or polyester mat being spanned over crack and ECOLINE-T applied over this to provide additional membrane strength.
- A test should always be done prior to application using the same cleaning preparation and application procedures to be used on the project.

Application:
- Should be applied in accordance with specific application specifications.
- ECOBASE is to be spray applied with catalyst water by appropriate equipment fitted with specific nozzles (the ECO Spray System) which forms a monolithic water protection coating. Spray application produces an approximate 20 mil build on each pass of spray gun.

Cleaning:
Clean all tools with kerosene and/or equivalent.

6. AVAILABILITY AND COST

Rocky Mountain Waterproofing
4158-A Nike Dr.
West Jordan, UT 84088
Office: 801-282-2100 Fax: 801-282-2111
Long distance in Utah: 877-282-2100

7. WARRANTY

Limited Warranty: EPRO warrants this product to be free from defects. EPRO makes no other warranties with respect to this product, express or implied, including without limitation the implied warranties of MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE. EPRO's liability shall be limited in all events to supplying sufficient product to retreat the specific areas to which defective product has been applied. EPRO shall have no other liability, including liability for incidental or resultant damages, whether due to breach of warranty or negligence. This warranty may not be modified or extended by representatives of EPRO or its distributors.


View The Warranty in PDF* format.


EcoWarranty.pdf (214 K)

* To View PDF files you must have Acrobat Reader.

8. MAINTENANCE

No maintenance required.

9. TECHNICAL SERVICES AND INFORMATION

Complete technical services and information are available from EPRO services.