The Most Effective and Versatile Sealer Available Today

Ecologically safe, water based, clear drying, penetrating and highly flexible film.

Extensive breathability, allowing air to escape from substrate.

Excellent water-repelling characteristics for long term protection.

Excellent resistance to mildew, chemicals, and UV.

Exceptional additives for UV, mildew and insect protection. as well as color enhancement.

---

ECOSIL

2. MANUFACTURER

Epro Services, INC.
P.O. Box 347
Derby, KS 67037
Phone: 800 - 882 - 1896
Fax: 316 - 262 - 2529

3. PRODUCT DESCRIPTION

Basic Use:
ECOSIL is designed to be a clear, long lasting penetrating waterproofing sealer for use on a variety of surfaces including wood, concrete, stucco, block, tile, and canvas. ECOSIL in a concentrate acts as an anti graffiti penetration thus allowing for the graffiti removal with an approved cleaner and low pressure water spray. SCOSIL increases the resistance to mildew, mold, and chemical and salt attack on the surface material.

Composition:
ECOSIL is a water-based, one component liquid silicon rubber dispersion which contains a proprietary blend of resins and penetrating agents and which exhibits excellent water repellency and breathability.

Benefits:
- Ecologically safe, clear, penetrating film which does not discolor with ultraviolet rays.
- Exceptional flexibility after curing, allowing for structural movement.
- Extensive breathability allowing air to escape from substrate.
- Excellent water-repelling characteristics for long-term protection.
- Extended resistance to mold and mildew.

Limitations:
- Should be applied to clean and dry surfaces.
- Adjacent areas and surfaces should be protected from contact with the product.
- Should not be applied when inclement weather is imminent.
- Should be applied above 40°F.
- Should not be applied where vapor barrier is required.
- Paint adhesion after application may be difficult unless paint contains silicone.
- Care should be taken over substrates containing water soluble pigments.
- A test area should always be done to verify compatibility of substrate with product.
- Excess material must always be removed from surface to prevent slipperiness.
- Solvent-based products should not be applied over this product.

4. TECHNICAL DATA

Coverage's See Chart

Specification Writer:
Contact EPRO services before writting specifications on this project. Test information available upon request.

5. INSTALLATION

Preparation:
Must include but not limited to:
- All surfaces should be dry and free of loose materials, release oils and other contaminants. These should be removed prior to application by power washing or appropriate cleaner. Cleaner must always be thoroughly rinsed from substrate prior to application of ECOSIL.
- A test should always be done prior to application using the same cleaning and application procedures to be used on the project.

Application:
- Should be applied in accordance with specific application specifications.
- Apply ECOSIL by low pressure spray unit, brush, or roller. Spray to saturation level, with a minimum 3-4 inch rundown. Excess material on surface should be removed with a dry roller or cloth. Damp substrates will increase the cure time. Do not apply when inclement weather is imminent. Immediately wash off any material on non-treated surfaces With soap and water solution.

Cleaning:
Clean all tools with soap and water.

6. Availability and Cost

Rocky Mountain Waterproofing
4158-A Nike Dr.
West Jordan, UT 84088
Office: 801-282-2100 Fax: 801-282-2111
Long distance in Utah: 877-282-2100

7. WARRANTY

Limited Warranty: EPRO warrants this product to be free from defects. EPRO makes no other warranties with respect to this product, express or implied, including without limitation the implied warranties of MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE. EPRO's liability shall be limited in all events to supplying sufficient product to retreat the specific areas to which defective product has been applied. EPRO shall have no other liability, including liability for incidental or resultant damages, whether due to breach of warranty or negligence. This warranty may not be modified or extended by representatives of EPRO or its distributors. Extended warranties are available only through Authorized Applicators.

8. MAINTENANCE

No maintenance required.

9. TECHNICAL SERVICES AND INFORMATION

Complete technical services and information are available from EPRO services.